Canon PIXMA MP600 빠른 시작 매뉴얼 - 페이지 25

{카테고리_이름} Canon PIXMA MP600에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP600 36 페이지. Personal printing guide
Canon PIXMA MP600에 대해서도 마찬가지입니다: 여기에서 시작 (2 페이지), 브로셔 (2 페이지), 보충 설명서 (6 페이지)

페이지 인쇄

Printing Photographs Directly from a

Compliant Device

Printing from a PictBridge Compliant Device

You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile

phone and print recorded images directly without using a computer.

Note

PictBridge is an industry standard enabling a range of digital photo solutions, including the direct

printing of photos from a digital still camera, camcorder or mobile phone* without the need to use a

computer. A device can be connected to this machine for direct printing regardless of the manufacturer

or the model as long as it complies with the PictBridge standard.

You can select the images to print and specify various print settings from your camera or mobile phone.

* PictBridge compatible digital still cameras, digital camcorders, and camera-equipped mobile phones

are hereafter collectively referred to as "PictBridge compliant device".

A device with this mark is PictBridge-compatible.

Connecting a PictBridge Compliant Device

To connect a PictBridge compliant device to this machine, use a USB cable recommended by

the device's manufacturer.

Caution

Do not connect any equipment other than PictBridge compliant devices or optional Bluetooth Units

BU-20 to the Direct Print Port of the machine. If you do so, electric shock, fire, or damage to the

device could result.

Note

When printing photos with the digital device connected to the machine, we recommend the use of

the AC adapter supplied with the device. If you are using the device battery, be sure to charge it

fully.

Set up the machine.

Refer to the Easy Setup Instructions to set up the machine and make it ready for printing.

Note

The Print Head cannot be aligned using the controls of the PictBridge compliant device. If Print

Head alignment is not yet performed and the MP Drivers are not installed in the computer, be sure

to align the Print Head. For details, refer to "Aligning the Print Head" in the User's Guide.

Turn on the machine and load the paper in the machine.