Astralpool SLX 자세한 지침 - 페이지 3
{카테고리_이름} Astralpool SLX에 대한 자세한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool SLX 6 페이지. Underwater niche lights for fibreglass pools
Astralpool SLX에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지)
페이지 인쇄
To turn the lights on
Simply switch the main power ON. The lights will resume in the same colour/pattern as was operating
when last powered.
To turn the lights off
Simply switch the main power OFF. The lights will remember which colour/pattern they are displaying
for next time.
To synchronise the lights
If you have multiple lights, you would normally want them showing the same colour or pattern. If for
some reason your lights are showing different colours or patterns, you will need to synchronise them.
To synchronise your lights:
1. Turn off main power and wait for at least three seconds.
2. Turn the lights on, then within two seconds, perform a double switch sequence.
To change the selected colour/pattern
The colour/pattern of the light can be moved to the next item in the list by following these steps:
1. Wait at least three seconds after turning the lights on before changing the selected colour/pattern,
otherwise a "synchronise" operation will be performed instead.
2. Perform a double switch sequence and the light will move to the next colour/pattern.
3. If this is still not the desired colour/pattern, perform a single switch sequence within ten seconds
of the previous sequence.
4. You can continue to move the selection by performing repeated single switch sequences. When
you are happy with your selection, simply leave the lights powered on.
5. If more than ten seconds has elapsed since your last single switch sequence, you will need to start
again with a double switch sequence. This initial double switch prevents occasional mains dips
from changing the selection accidentally.
Inst.374 Astral Pool SLX Light Detailed Instructions V10.15
3