Canon PIXMA MP620 series 설정 지침

{카테고리_이름} Canon PIXMA MP620 series에 대한 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP620 series 4 페이지. Installing your multifunction on additional computers windows os
Canon PIXMA MP620 series에 대해서도 마찬가지입니다: 설정 (4 페이지), 보충 설명서 (6 페이지), 매뉴얼 (20 페이지), 사양 (2 페이지), 매뉴얼 (10 페이지), 매뉴얼 (8 페이지), 네트워크 설정 매뉴얼 (22 페이지), 설치 매뉴얼 (11 페이지), 연결 매뉴얼 (19 페이지), 설치 매뉴얼 (7 페이지), 서비스 매뉴얼 (46 페이지), 설치 (21 페이지)

페이지 인쇄
Canon PIXMA MP620 series 설정 지침
Easy Setup Instructions For Apple AirPort
Wireless Networks
These instructions are for setting up your PIXMA machine on an Apple AirPort wireless network in a Mac OS X environment. For all other environments, including USB
connections, wired networks, non-AirPort wireless networks, and all Windows installations, please use the Getting Started Guide. Also for setting up additional computers on
your network to access the machine, refer to the Getting Started Guide.
Before starting, please locate and write down the your network name and password. Since Apple recommends using the WPA/WPA2 encryption method for AirPort networks,
these instructions are for configuring the machine on WPA/WPA2 encrypted networks.
Network Name (also called SSID):
1
Unpack the machine and prepare the hardware for use by following chapters 1 to 4 of the Getting Started Guide.
2
1
Connect one end of the USB cable to the computer
and the other to the machine.
Make sure the machine is turned on.
4
Enter your administrator name and password.
Click OK.
If you do not know your administrator name or password,
click Help, then follow the on-screen instructions.
6
Follow on-screen instructions.
series
Network password (if applicable):
H ard ware Setu p
Driver/S oftware In stall
2
Turn on the computer, then insert the Setup
CD-ROM into the CD-ROM drive.
5
Click Easy Install.
The drivers, application software, and on-screen
manuals are installed automatically.
•
If the registration screen appears, follow the on-screen
instructions to register your product. You will need your
product serial number which is located on the packaging,
or, on the inside lower part of the machine.
Serial Number
* * * * * * *
3
Double-click the Setup icon.
If the CD-ROM folder does not open automatically,
double-click the CANON_IJ icon on the desktop.
7
Click Restart.
When the computer restarts, Canon IJ Network Tool starts
automatically.
Click Restart to restart the computer.
After restarting the computer, remove the Setup CD-ROM
and keep it in a safe place.