Canon PIXMA MP780 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Canon PIXMA MP780에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP780 49 페이지. Photo multifunction printer
Canon PIXMA MP780에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 보충 설명서 (6 페이지), 빠른 시작 매뉴얼 (48 페이지)
페이지 인쇄
3. Order a normal business line from your telephone company's business representative.
The line should be a regular voice grade line or the equivalent one. Use one line per
machine.
DDD (Direct Distance Dial) line
-or-
IDDD (International Direct Distance Dial) line if you communicate overseas
Canon recommends an individual line following industry standards, such as the 2500
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX (P
rivate Branch Exchange) unit without"Cal l Waiting" can be used with the machine.
Button telephone systems are not recommended because they send nonstandard signals
to individual telephones for ringing and special codes, which may cause a fax error.
C. Power Requirements
This machine should be connected to a standard 120 volt AC, two-prong grounded outlet
only. Do not connect this machine to an outlet or power line shared with other appliances
that cause "electrical noise." Air conditioners, electric typewriters, copiers, and machines
of this sort generate electrical noise which often interferes with communications
equipment and the sending or receiving of documents.
Connection Of The Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
The REN is used to determine the number of devices that may be connected to a telephone
line. Excessive RENs on a telephone line may result in the devices not ringing in response
to an incoming call. In most but not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company. The REN for this
product is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
An FCC compliant telephone line cable cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone network or
premises wiring using a compatible modular jack which is Part 68 compliant. See
Installation instructions for details. This equipment if it uses a telephone receiver is
hearing aid compatible.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subjected to state tariffs.
11