Canon PIXMA MP810 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Canon PIXMA MP810에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP810 38 페이지. Personal printing guide
Canon PIXMA MP810에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 빠른 시작 (1 페이지), 보충 설명서 (6 페이지), 서비스 매뉴얼 (20 페이지)

페이지 인쇄

1. Replacing an Ink Tank

Preparing the Machine

Be sure to read your setup sheet first for setting up your machine and getting it ready for use.

Unpack the machine

Please confirm the included items against the illustration printed on the lid of the packing box.

Important

Do not connect the USB cable until after the software is installed.

A USB cable is necessary to connect the machine with your computer.

Turn on the machine.

Caution

Be sure to remove the tapes before you turn on the machine.

Note

The tape position is subject to change.

If an unintended language is displayed on the LCD, press the Back button to return to the

Language selection screen.

Install the Print Head.

Caution

Do not touch internal parts other than the Print Head Lock Lever.

Important

If the Scanning Unit (Printer Cover) is open for more than 10 minutes, the Print Head Holder

moves to the right side. In this case, close the Scanning Unit (Printer Cover), and open it again.

Note

There might be some transparent or light blue ink on the inside of the bag the print head comes

in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink

on yourself when handling these items.

Do not reattach the protective cap once it has been removed.

Install the ink tanks.

Important

Make sure that all the ink tanks are installed in the correct position, matching the label. The

machine cannot be used unless all the ink tanks are installed.

Wait for about 2 minutes, until the machine has stopped making operating noises, before

proceeding.

Note

Be sure to remove the clear film from the ink tank in the exact order as shown in step 3 of your

setup sheet.

Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes

and hands.

Do not reattach the protective cap once you have removed it.

An error message will be displayed on the LCD if an ink tank is not installed properly. Open the

Scanning Unit (Printer Cover) and make sure that position of all the ink tanks match the label.

Preparing the Machine