Canon PIXMA MX310 series 서비스 매뉴얼 - 페이지 11
{카테고리_이름} Canon PIXMA MX310 series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX310 series 25 페이지. Cartridge reset
Canon PIXMA MX310 series에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 브로셔 (2 페이지), 사용자 설명서 (2 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
2. ADJUSTMENT / SETTINGS
2-1. Service Mode
<Service mode operation procedures>
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF
button. (DO NOT release the buttons). The Power LED lights in green to indicate that a function is
selectable.
2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the
ON/OFF and Stop/Reset buttons. (Each time the Stop/Reset button is pressed, the Alarm and Power
LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
4) When the Power LED lights in green (and "Service Mode Idle" is displayed on the LCD), press the
Stop/Reset button the specified number of time(s) according to the function listed in the table below,
then press the ON/OFF button. (Each time the Stop/Reset button is pressed, the Alarm and Power LEDs
light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Time(s)
LED indication
0 times
Green (Power) Power off
1 time
Orange (Alarm) Service test print
2 times
Green (Power) EEPROM information
3 times
Orange (Alarm) EEPROM initialization
Function
print
(11/32)
Remarks
When the ink cartridge is not installed, the
carriage returns and locks in the home position
capped.
Service test print
- Model name
- ROM version
- Ink absorber counter value (ink amount in the
ink absorber)
- USB serial number
- Destination
- EEPROM information
- Barcode (model name + destination), etc.
EEPROM information print
- Model name
- Destination
- ROM version
- Ink absorber counter value (ink amount in the
ink absorber)
- Print information
- Error information, etc.
The following items are NOT initialized, and the
shipment arrival flag is not set:
- Destination settings
- Absorbed ink amount
- USB serial number
- Region code of ink cartridge
- Record of ink absorber counter resetting and
setting, etc.