Canon PIXMA MX340 Series 간소화된 서비스 매뉴얼 - 페이지 31

{카테고리_이름} Canon PIXMA MX340 Series에 대한 간소화된 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX340 Series 35 페이지. Cartridge reset
Canon PIXMA MX340 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (11 페이지), 네트워크 설정 매뉴얼 (26 페이지), 브로셔 (2 페이지), 매뉴얼 (8 페이지), 매뉴얼 (10 페이지), 네트워크 설정 문제 해결 (13 페이지), 네트워크 설치 매뉴얼 (16 페이지), 연결 매뉴얼 (11 페이지), 매뉴얼 (4 페이지)

Canon PIXMA MX340 Series 간소화된 서비스 매뉴얼
FD LINK
MOLYKOTE PG-641
Over the entire surface where the cam slides:
9 to 18 mg
FD LINK A
MOLYKOTE PG-641
EJECT TRAY BACK
MOLYKOTE PG-641

3-6. Notes on Transportation

1)
In the service mode, press the ON button to finish the mode, and confirm that the paper lifting
plate of the rear tray is raised.
2)
Keep the ink cartridges installed in the carriage. If the ink cartridge is removed from the printer
and left alone by itself, ink (the pigment-based black ink in particular) is likely to dry.
3)
Turn off the printer to securely lock the carriage in the home position. (When the printer is
turned off, the carriage is automatically locked in place.) This is to prevent the carriage from
moving and applying stress to the carriage flexible cable, or causing ink leakage, during
transportation.
FD LINK C
MOLYKOTE PG-641
Sliding portions: 4.5 to 9 mg x 2 locations
Sliding portions: 4.5 to 9 mg x 2 locations
(30/37)
Sliding portion:
4.5 to 9 mg x 1 location
Apply grease from this side.