Akva-Stabil Effect-Line 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} Akva-Stabil Effect-Line에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akva-Stabil Effect-Line 12 페이지. Aquarium racks

Mount all inlet pipes. In sections of aquariums without

glass partitions, use the pipe with 3 taps. In sections of

aquariums with one glass partition, use the pipe with 6

taps. In sections with 2 partitions, use one of each type of

inlet pipe.

Lay the top shelves on the shelving unit. Check that the

spacer pieces at the top of the unit are in place.

Lay the ballast boxes for the light-ﬁttings on top of the

shelves.

Pull out the mounting strip

and insert the light-ﬁtting.

Arrange the ballast boxes so there are 3 over each ladder.

Insert the plugs from the

ballast boxes in the 4-point

sockets.

Screw the hinge bases to

the front side of the shelv-

ing unit.

Place light-ﬁttings over the

three upper bays of each

section.

All parts for the hinges.

Before screwing base no. 2

to the ladder, the steel pegs

with washer and split pin

must be mounted.