Canon PIXMA MX7600 네트워크 설정 매뉴얼 - 페이지 8
{카테고리_이름} Canon PIXMA MX7600에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX7600 43 페이지. Office all-in-one printer
Canon PIXMA MX7600에 대해서도 마찬가지입니다: 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 설정 지침 (2 페이지), 브로셔 (2 페이지)
페이지 인쇄
2-1 Setting Up for Use over Wired LAN
Important
When the machine has not been connected to the network, to set up the machine to be used from a LAN-
connected computer, the necessary software must be installed on the computer. See "1 Preparing for
Setup" on page 2 and "2 Installing the Software" on page 3 to confirm that the software installation is
complete, then proceed with the procedure below.
1
On the Setup Method screen, select Set up
the printer and the computer for network
use, then click Next.
Note
If you select Use the printer via USB, the machine is
set up to be used with USB connection.
2
When the Printer Connection screen
appears, connect the machine to the
computer with a USB cable, then turn on the
machine.
When you turn on the machine, the COPY button
flashes green, then remains lit.
When the computer detects the machine, the next
screen will appear automatically.
Note
To set up the machine that is not yet connected to a
wired LAN, connect the machine and the computer
with a USB cable.
If you cannot go to the next procedure after three
minutes, see "Cannot Install the MP Drivers" on
page 31.
3
When the Setup Preparations dialog box
appears, confirm that preparation is
complete, then click Next.
Note
If the machine's network settings are already
configured, the Setup Environment Confirmation
dialog box appears asking for your confirmation to use
the machine with the current settings. You can
proceed with the setup using the current network
settings. To do so, click Use it as is. To reconfigure the
network settings, click Reconfigure.
6
Setting Up the Machine and the Computer (Windows)
(continued from step 9 on page 5)