Canon PIXMA MX860 series 시작하기 - 페이지 23

{카테고리_이름} Canon PIXMA MX860 series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX860 series 38 페이지. Setting up in default mode (tel priority mode) without an answering machine dsl/cable modem connection
Canon PIXMA MX860 series에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 보충 설명서 (6 페이지), 문제 해결 매뉴얼 (22 페이지), 매뉴얼 (10 페이지), 네트워크 매뉴얼 (9 페이지), 매뉴얼 (8 페이지), 사양 (2 페이지), 설정 매뉴얼 (17 페이지), 매뉴얼 (18 페이지), 설정 (27 페이지)

Canon PIXMA MX860 series 시작하기
wireless network with

Wireless Networks with Multiple Airport Access Points

multiple access points
(example: Airport Extreme and Airport Express)
For example, Airport Extreme and Airport Express or Time Capsule
If your network has only a single access point, go to
page 19.
1
Locate the name and password (if applicable) of your wireless
network
Click the
icon in the menu bar and write down the network name
with the checkmark next to it.
2
Make sure the MX860 is ready
Ensure the MX860 is connected to your computer
with the USB cable and is powered on
You will need the USB cable only for the initial network
setup. Once your MX860 is connected to your network, the USB
cable is no longer needed.
Wi-Fi router
Wi-Fi
router
wired network connecting
with an Ethernet cable
The MX860 is set at the factory to connect to a wireless
(Wi-Fi) network. If your MX860 has been previously set for a wired
network, ensure the connection type is set for a wireless network.
Go to "Set the Network Connection Type" on page 28 for details.
3
LAN connection
Select
On the Canon IJ Network Tool dialog, select LAN connection, then
click OK.
router
4
Select printer to use
a
Setup in the pop-up menu.
Select
b
MX860 series in the Printers pane.
Select
c
OK.
Click
prepare
hardware software
network
prepare
hardware
software
network
prepare
hardware software
network
prepare
hardware software
network
23