Canon PIXMA MX870 Series 네트워크 설정 매뉴얼 - 페이지 17

{카테고리_이름} Canon PIXMA MX870 Series에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX870 Series 34 페이지. Setting up in default mode (tel priority mode) without an answering machine
Canon PIXMA MX870 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (11 페이지), 네트워크 설정 매뉴얼 (16 페이지), 브로셔 (2 페이지), 네트워크 설치 매뉴얼 (24 페이지), 네트워크 설치 매뉴얼 (17 페이지), 설정 매뉴얼 (15 페이지), 설정 (15 페이지)

페이지 인쇄
Canon PIXMA MX870 Series 네트워크 설정 매뉴얼
Check 6
Is the access point operating in IEEE802.11b or IEEE802.11g (2.4 GHz)?
•
For details on how to check the operating mode of the access point, refer to the manual supplied with the access point or contact its manufacturer.
Set the access point to operate in IEEE802.11b or IEEE802.11g (2.4 GHz).
•
For details on how to change the operating mode of the access point, refer to the manual supplied with the access point or contact its manufacturer.
Check 7
When using a wired connection, is wired LAN enabled?
Perform setup by following the procedures in "Wired Setup" and onward in the printed manual: Getting Started.
Check 8
When using a router, are the Ethernet cables of the printer and computer connected to the LAN side of the router?
•
For details on how to check the connection, refer to the manual supplied with the router or contact its manufacturer.
If the Ethernet cable is connected to the WAN side of the router, connect it to the LAN side.
If the Ethernet cable is loose, connect it properly.
•
For the connection procedure, refer to the manual supplied with the router or contact its manufacturer.
Glossary
•
Firewall
A system to use computers connected to the Internet and corporate networks safely. It protects computers and corporate networks against unauthorized access, or restricts unauthorized access to corporate
networks and the Internet.