Canon PIXMA MX882 Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Canon PIXMA MX882 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX882 Series 23 페이지. Using your multifunction with additional computers on your network mac os
Canon PIXMA MX882 Series에 대해서도 마찬가지입니다: 매뉴얼 (10 페이지), 네트워크 설정 매뉴얼 (34 페이지), 네트워크 설정 매뉴얼 (14 페이지), 네트워크 설정 매뉴얼 (19 페이지)

페이지 인쇄

Preparing to Connect My Multifunction

To My Network

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

• Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

• Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password required to set to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.