Astralpool Jetstream 설치 및 운영 지침 매뉴얼 - 페이지 5

{카테고리_이름} Astralpool Jetstream에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool Jetstream 10 페이지.

OPERATING INSTRUCTIONS – POWER SUPPLY

1. Insert the plug of the floating cable (1) into the power supply socket (2)

2. The cleaner has 2 cleaning modes;

a. Small Pool Mode

b. Large Pool Mode

These cleaning programs will adjust the cleaning patters according to your pool side. Select the cleaning

programs by using the toggle switch (4) located on the power supply as follows;

For Small Pools – set switch to "O" (5) (Recommended for pools smaller than 25 square metres)

ii.

For Larger Pools – set switch to "I" (6) (Recommended for pools larger than 25 square metres)

3. Turn the main power switch (3) to ON. The cleaner will now start working. The power supply will shut off

automatically when the cleaning cycle has finished. The cleaning cycles are

a. 2 hours for Small Pools

b. 3 hours for Large Pools

4. To restart a cleaning cycle, turn power supply OFF, wait 30 seconds and turn ON again.

Inst308 Jetstream Robotic Pool Cleaner Instructions V.08_12