Astralpool QB800 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Astralpool QB800에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool QB800 16 페이지. Robotic pool cleaner
Astralpool QB800에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)
페이지 인쇄
6
Section 3. Assembly
3.1
Contents
The packaging should contain the following items:
•
Cleaner and floating cable with swivel
•
Control unit
•
Manual, Quick Start Guide, and Warranty Card
•
Transport and storage caddy components
(depending on model):
a.
handle frame
b.
support blocks (x 2)
c.
wheels (x 2)
d.
wheel locking clips (x 2)
e.
wheel axle / hubcap (x 2)
f.
base unit
g.
cleaner hook
h.
caddy handle
x 2
B
A
F
Figure 1.
Transport Caddy Assembly Components
When unpacking the cleaner and its components:
•
Check to make sure each component is in the box.
•
Check cleaner and components for damage
during transport.
•
If there are any missing parts or damage, contact
Technical Support at 1300 186 875
D
C
x 2
x 2
x 2
E
H
G
QB800 robotic cleaner
3.2
Assemble the Transport Caddy
1.
Unscrew the handnut from the base.
Figure 2.
Remove Handnut from Base Unit
2.
Insert the metal handle frame tubing into the base
with notch end at the top, then rotate so the bends
are away from you.
3.
Push base down so the metal handle frame is seated in
the recess on the underside of the base.
Figure 3.
Connect Metal Frame to Base Unit
4.
Slide the handnut over the tube and twist to tighten
onto base unit.
Owner's Manual