Astralpool QG50 소유자 매뉴얼 - 페이지 9
{카테고리_이름} Astralpool QG50에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool QG50 16 페이지. Robotic pool cleaner
페이지 인쇄
QG50 robotic cleaner
4.2
Start / Stop Cleaning
Press Start/Stop button to begin or interrupt cleaner
operation (Figure 14).
Information
LED
Figure 14. Cleaner Control Unit
4.3
Remove from the Pool
1.
Gently pull the floating cable to bring the cleaner
within arm's reach.
2.
Use the handle to lift the cleaner from the water
(Figure 15). Never lift the cleaner out of the pool by the
floating cable.
Figure 15. Lift Cleaner From Pool with Handle
owner's Manual
Start/Stop Cleaner
Operation
3.
Hold the cleaner vertically over the pool surface to
drain water before removing (Figure 16).
Figure 16. Drain Water from the Cleaner
4.4
Clean the Filter Canister
Empty the canister as soon as the cycle ends.
WARNING
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
1.
Unplug power to the cleaner at the control unit.
Unplug the control unit from the power source.
2.
Pull up to release the filter canister handle (Figure 17).
Figure 17. Release Filter Canister Handle
9