Canon PIXMA TS8300 Series 시작하기 - 페이지 4

{카테고리_이름} Canon PIXMA TS8300 Series에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA TS8300 Series 17 페이지.
Canon PIXMA TS8300 Series에 대해서도 마찬가지입니다: 시작하기 (16 페이지), 시작하기 (40 페이지)

페이지 인쇄
Canon PIXMA TS8300 Series 시작하기
Setting Up the Printer
2
Remove the tape and film on the ink tank.
b
•
Check that no tape is left over.
3
Slowly remove the orange cap.
Important
•
Do not squeeze the ink tank with the
Y-shaped air hole blocked.
•
Do not touch the areas shown in red.
4
Install the ink tank.
•
Insert the ink tank into the print head and press down
until it clicks.
5
Check that the color of the ink tank you installed
appears on the screen.
Important
If the color is not displayed on the screen even though you
have installed the ink tank, the color of the ink tank may be
wrong or you may have installed an ink tank, such as one
with a different model number, that is not supported by this
printer. Either install an ink tank for the correct color or use the
provided ink tank for setup.
2
a
6
Repeat steps 2 through 5 to install all the ink
tanks.
•
Check that all the colors appear.
7
Close the scanning unit / cover.
•
The printer will start initializing.
a
b

5. Loading Paper

Check!
Remove any orange tape.
1
Tap OK.
2
Remove the cassette from the printer and
remove the cassette cover.
Cassette cover
b
Caution
Watch your fingers.
a