Astralpool RF Robotic 설치 및 운영 지침 매뉴얼 - 페이지 5
{카테고리_이름} Astralpool RF Robotic에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool RF Robotic 17 페이지.
페이지 인쇄
Operating the pool cleaner
IMPORTANT:
Please be sure to always keep your pool cleaner properly stored anywhere between 10 to 40 degrees Celsius (50 to 104 degrees Fahrenheit). This will keep the motors,
plastics and seals protected. Failure to comply will result in loss of warranty.
Robot can be used in water with temperatures ranging from 13°C to 35°C (55°F to 95°F). However, the recommended optimal temperature is between 22°C and 32°C (72°F
and 90°F)
Maintenance and adjustment
CAUTION:
To avoid scratches and other blemishes
appearing on your robot, simply find a
smooth surface for it to rest on when
cleaning the debris bag or performing
minor adjustments.
These scratches could produce changes
in the robots soft and smooth edges
resulting in potential damage to some
flexible pool surfaces.
smooth
surface
5
a. Power LED
The blue LED flashes when the power supply is in standby mode and lights
continuously when the pool cleaner is operating.The power button switches
between ON and STANDBY
b. "POWER" button
The button switches between "ON" and "STANDBY".
IMPORTANT- After every cycle the pool cleaner will automatically go to "standby".
In case you want to turn the machine off during the working cycle, press the
"power" button once and the LED will start flashing, indicating that the machine
has stopped running.
smooth
surface