Astralpool 52141 전기 연결 매뉴얼 - 페이지 2

{카테고리_이름} Astralpool 52141에 대한 전기 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool 52141 17 페이지.

ENGLISH

IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be im-

plemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before

beginning installation and start-up.

Keep this manual for future reference.

To achieve optimum performance of the Projector LumiPlus Mini RGB-DMX, follow the instructions provided below:

1. ELECTRICAL CONNECTION

The projectors are supplied with a 2-wire 1.5mm2 Cu H07RNF cable.

This projector has been designed to operate only with a DMX control and with the DMX Mini power supply from AstralPool

(code 52142). It doesn't work with any other control system.

2. CONTROL SYSTEMS OF THE RGB-DMX LED PROJECTORS

The Mini or Quadraled LED projectors use 3 DMX channels, one for each of the 3 primary colours (red, green and blue).

The configuration of the DMX address should be performed from the DMX power supply of code 52142.

The mains lead 52142 allows the connection of up to a maximum of 9 Mini LEDs RGB-DMX projectors with independent

channels. This mains lead is responsible for adapting the input of 230V~AC to

These are dotted outputs, therefore it does not matter to which of them the projectors are connected.

See manual of the DMX mains lead code 52142 for information regarding how to assing

DMX addresses to each Mini LED projector or Quadraled and how to configure a system.

The connection has no polarity

24V DC for the 6 outputs available.