Canon Auto Zoom 814 사용 설명서 - 페이지 19
{카테고리_이름} Canon Auto Zoom 814에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon Auto Zoom 814 36 페이지. 8mm movie camera
Canon Auto Zoom 814에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지)
페이지 인쇄
o
19
8
End of shooting and removing the film cartridge
A Super 8 cartridge contains 50 feet of film running one way
.
With
this camera, when 47.5 feet of film have been exposed, an orange caution
lamp lights up at the bottom of the viewfinder to show that after 2 .5 feet
film will end. When the film end caution lamp lights up, take note of how
much film remains and run it the full 50
feet.
Then open the rear cover imd
remove the film
cartridge.
• When removing the cartridge
,
pull the lever under the cartridge guide and
you will be able to take it out quite easily
.
• When the full 50 feet of film have been exposed and film has stopped
running, you will notice the change of the running sound heard
before.
Confirm it by means of the footage
counter.
• The exposed film has a cut-out on its perforations and is easily
distinguished from the unexposed one.
• Send the exposed film promptly to an authorized processor.
9
Changing film halfway
A Super 8 movie camera uses a cartridge and you can exchange
cartridges of different types of film even when a cartridge is only
halfway.
By exchanging the cartridges halfway, you lose only 2 inches of film or
less,
includi
ng behind and before the naked part of film in the exposure
window of cartridge.
Precautions to take when changing the cartridges halfway.
• To prevent the last scene from undesired
exposure,
run the film vacantly
a little before changing the cartridge.
• When you change cartridges the footage counter automatically resets at
"0". So we advise you to read the footage counter before removing and
write it down on the removed cartridge as a reminder.
• The f
il
m end caution lamp is combined to the footage counter and does
not turn on if a half-used cartridge is loaded. Confirm the f
i
lm end with the
footage counter or the film driving sound.