Acer AcerPower 2100 시작하기 매뉴얼 - 페이지 17

{카테고리_이름} Acer AcerPower 2100에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AcerPower 2100 20 페이지. Acer acerpower 2100: user guide
Acer AcerPower 2100에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

Table 1-1
System Error Messages
Error Message
Bad CMOS Battery
CMOS Checksum
Error
Floppy Drive
Controller Error
Floppy Drive Error
DRAM Configuration
Error
Equipment
Configuration Error
Hard Disk Controller
Error
Hard Disk 0 (1, 2, 3)
Auto Detection
Failed
I/O Parity Error
PS/2 Keyboard
Error or No
Keyboard
Connected
PS/2 Keyboard
Interface Error
Memory Error
Memory Size
Mismatch
Corrective Action
Replace battery. Contact your dealer.
Run Setup. See Chapter 3.
Check and connect the cable to the floppy
drive or controller.
Floppy may be bad. If not, check the
floppy drive and replace if necessary.
Check and modify DRAM configuration to
agree with Table 4-1.
Run Setup. See Chapter 3.
Check and connect the cable to the hard
disk drive or controller.
Replace the hard disk drive controller.
Check the HDD cable connections and
CMOS setup configuration.
Contact your dealer.
Check and connect the keyboard to the
system unit.
Contact your dealer.
Check DIMMs on the system board.
Contact your dealer.
Run Setup. See Chapter 3.
Chapter 1 - Getting Started 1-17