Astralpool KEFREN 사용 설명서 - 페이지 7

{카테고리_이름} Astralpool KEFREN에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool KEFREN 12 페이지. Inground and half-inground bin
Astralpool KEFREN에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

4. START-UP

1. Only in the KEOPS housing. Remove the two covers from the housing to begin

start-up. Unscrew the screws that attach the cover to the housing, before lifting it.

2. Open the filter and fill it halfway with water. Protect the diffuser in the interior of

the filter so sand does not get into it.

3. Fill the filter with the appropriate quantity (indicated on the specifications label,

or up to 2/3 of the total filter height) of silex sand with a grain size of 0.4 - 0.8.

4. Assemble the T manometer, the seal, the manometer and the air purge cover.

Teflon tape is not necessary, as this point is sealed by the seal. Do not tighten the T

of the manometer with any tools; it is enough to do this with the hand.

5. Clean the remnants of silex from the mouth, cover and casket housing, and close

the filter. For more information, please consult the filter manual.

If the unit is below the water level, you will only need to open the input and output

valves and the air vent until the filter and the pump are full of water.

6. Put the valves in the following positions:

- SKIMMER

- SUMP

- POOL CLEANER

- RETURN

- SELECTOR VALVE

OPEN

WASH