Astralpool KEOPS 설치 매뉴얼 - 페이지 8

{카테고리_이름} Astralpool KEOPS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool KEOPS 12 페이지. Inground and half-inground bin
Astralpool KEOPS에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

3.2. - To make a concrete slab with the same level.

KEOPS

3.3. - Put the bin

3.4.-You have to carry out the digging for preparing the canalization of the inlet

and outlet piping and the electrical supplier.

The inlet and outlet piping must be installed under a sand-bed.

Connect the catch basin to a general outflow with a light declination.

3.5. Bore the bin in the side in which the electrical supplier it is planned to enter.

The hole it has to be of the same diameter as the cable installed. The section of

the cable is choosen in accordance with the consumed power and the fall of

pressure. Install in the foreseen entrance a packing gland adapted to the cable's

KEFREN

section. It is recommendable to protect the cable in the entire course with a

suitable pipe.

IMPORTANT:

The installation must have a high sensibility balance gear of two poles asunder in

the general chart (according to rule RBT ITC-BT-017). The balance gear is not

supplied with the compact.

Refill the bin's lateral with gravel. In the case of especially smooth areas one

recommends to construct walls of containment or, in the Keops bin put a interior

metalic reinforcement (ref.xxxxxx).