Astralpool 1800 Series 설치 및 운영 지침 매뉴얼 - 페이지 5

{카테고리_이름} Astralpool 1800 Series에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astralpool 1800 Series 19 페이지.

Setting up your system:

Step 1

Remove ﬁ lter, pump and base from the carton.

Remove filter, pump and base from the carton.

Using (2) bolts and washers, mount pump

Using (2) 1/4 x 20 bolts and washers, mount pump

to base. The pump should be positioned

to base. The pump mounts using the jack nuts

such that the pump strainer is supported by

installed in the base. The pump should be posi-

the system base.

tioned such that the pump strainer is supported by

the system base.

❖ Note: Some systems are supplied with push-in

grommet nuts for the pump mount. Install these

grommets in the base using the pre-drilled holes

noted. (See Step 1A).

Step 1A

Push the grommet nuts into the pre-drilled holes in

the system base. Use the illustration at the right to

ensure the correct holes are used. Position the

slots in the pump motor base over the grommet

nuts and install the self-tapping screws to secure

the pump to the base.