Cognex DataMan 700 series 빠른 참조 매뉴얼 - 페이지 12

{카테고리_이름} Cognex DataMan 700 series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cognex DataMan 700 series 14 페이지. Id readers

Laser Information

LASER LIGHT, DO NOT STARE INTO BEAM: CLASS 2 LASER PRODUCT

FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE SERIOUS INJURY

• Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

• Do not attempt to service or repair this product -- return it to Cognex for

service.

• Do not permit anyone other than Cognex Corporation or Cognex-authorized

personnel to service, repair, or adjust this product.

• Do not attempt to open or modify this device except as described in this

document.

• Do not direct or reflect laser light toward people or reflective objects.

• Do not operate this device if it is damaged or if the covers or seals are

missing or damaged.

This Laser Product is designated as Class 2 during all procedures of operation.

Wavelength

Laser Power for classification

Beam Diameter

Divergence

For assistance contact Cognex Corporation at http://support.cognex.com

22 DataMan 700 Series Quick Reference Guide

650 nm

< 1 mW

< 3mm at aperture

< 1.5 mrad

DM700-HOLDER-00

DataMan 700 Series Quick Reference Guide 23

DataMan 750 and 750S

The DataMan 750 includes

the Cognex IDMax reading

algorithm for reading difficult

2D codes which include low

contrast and damaged codes.

The DataMan 750S uses

standard 1D and 2D reading

algorithms for reading high

quality 1D and 2D codes.