Canon EOS C200B 펌웨어 업데이트 절차 - 페이지 4
{카테고리_이름} Canon EOS C200B에 대한 펌웨어 업데이트 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS C200B 5 페이지. Digital cinema camera
Canon EOS C200B에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지)
페이지 인쇄
For Mac OS:
1.
Insert the initialized SD card into a card reader or the computer's SD card slot.
A [CANON] icon will be displayed on the desktop.
2.
To copy the data, drag & drop the [VNC4.FIM] update data from the downloaded [c200-v1041-mac] icon to
the [CANON] icon.
Caution
Please be sure to copy the update data to the root directory of the [CANON] SD card.
3.
After copying the data, open the folder by double-clicking the [CANON] icon.
If the [VNC4.FIM] file (the firmware update data) is there, the copying process is complete.
Step 4: Update the camera to the new firmware
1.
After inserting the charged battery pack into the camera, connect the camera to the power outlet using the
compact power adapter.
2.
Insert the SD card prepared in Step 3 into the camera's SD card slot B.
3.
Set the
4.
Press the MENU, and in the submenu of [ System Setup], select [Firmware], and then press the joystick.
The firmware update confirmation screen will be displayed.
5.
When you select [OK] and then press the joystick, the firmware update will start.
Update the firmware?
Version 1.0.x.1.00 → Version 1.0.4.1.00
Cancel
Caution
The firmware update takes approximately 4 minutes to complete. During the update, please do not turn off the camera
or operate any of its controls. Doing so may cause the camera to malfunction.
switch to CAMERA.
OK
Updating the firmware
Do not turn off/disconnect the power
4