Astrapool Dual Pure 160 매뉴얼 - 페이지 19

{카테고리_이름} Astrapool Dual Pure 160에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrapool Dual Pure 160 20 페이지. Salt electrolysis and ph regulation

Calibration of the pH probe can be conducted with a pH value between 6.2 and 8.6. If the value of

the pH measured by the probe is lower than 6.2 or higher than 8.6, the alarm lights up

product injection ceases.

Solutions:

e) To bring the pH back to the correct value, check the product concentration in the container.

f) Check calibration of the probe

g) If the probe indicates a value higher than 11, it is defective

h) Have the condition of the probe checked

To delete the error message, switch the device off and then on again.

TAYLOR SCALE

The unit is covered by a 2-year warranty against manufacturing defects as from the date of delivery.

If, during this period, repair of the unit or replacement of certain parts should be necessary, unless

such is due to negligence or an error attributable to the user while handling the equipment, return

the unit carriage paid.

The manufacturer shall return the goods in the same way.

The following are not covered by the warranty:

If the pH pump has been operated with a non-conform product such as HCL acid

If the probe has been subjected to poor winter storage conditions or has been broken by

handling or flow

Lightning

Electrical overvoltage

Flooding

Normal wear & tear of the probe

Número de revisión

ENGLISH

and

Rev 001-2013-08-06