Acer AcerPower 6500 사용자 설명서 - 페이지 31
{카테고리_이름} Acer AcerPower 6500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AcerPower 6500 33 페이지. Acer acerpower 6500: user guide
Acer AcerPower 6500에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)
페이지 인쇄Table 1-5
System Error Messages (continued)
Error Message
Keyboard Interface Error
Keyboard Locked
Memory Error
Memory Size Mismatch
Serial 1 Conflict
Serial 2 Conflict
Parallel Port Conflict
Pointing Device Error
Pointing Device Interface
Error
Press F1 key to continue
or Ctrl-Alt-Esc for Setup
Press Esc to turn off
NMI, any key to reboot
Protected Mode Test Fail
RAM BIOS Error
Real Time Clock Error
Shadow RAM Fail
System Memory Address
Error
1.12.3
Correcting Error Conditions
As a general rule, the "Press F1 to continue" error message is caused
by a configuration problem which can be easily corrected.
equipment malfunction is more likely to cause a fatal error, i.e., an
error that causes complete system failure.
System Board
Corrective Action
Contact your dealer.
Unlock the keyboard.
Check DIMMs on the system board.
Contact your dealer.
Run Setup.
Run Setup.
Disable Onboard Serial 1.
Run Setup.
Disable Onboard Serial 2.
Run Setup.
Disable Onboard Parallel Port.
Check or connect the pointing device.
Contact your dealer.
Contact your dealer.
Press
or
Press
to disregard NMI error.
Press any key to reboot the system.
Contact your dealer.
Contact your dealer.
Run Setup.
Contact your dealer.
Check DIMMs on system board or
contact your dealer.
.
An
1-31