Amerlux GRUV - 1.5 - GB-LED 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Amerlux GRUV - 1.5 - GB-LED에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amerlux GRUV - 1.5 - GB-LED 6 페이지.
페이지 인쇄AMERLUX
LIGHTING SOLUTIONS
GRUV1.5-GB- LED - WALL/CEILING CORNER INSTALLATION (L-PATTERN)
Gyp Board
WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN
ONLY. FIXTURE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL
AND FEDERAL SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING .
Wall/Ceiling Corner Installation
1. Install Vertical fixture(s) from the
ground up. Secure fixtures following
instructions from pages 1-3. Corner
fixture will already have corner cover
attached.
2. Once the fixture is secure, feed
power source through the knock-out.
Splice to harness according to code.
3. Install Horizontal fixture(s) closest
to corner.
A. Lift fixture to ceiling. Connect wire
harnesses of the two fixtures.
B. Slide housing into corner cover, to
contact (Housing overlap min. of
3
max.
" at contact) Reference layout
4
drawing for location.
Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605
R
ADAPT. ABILITY.
TM
RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.
B. Loosen the top screw to the Top Bracket. Slide
Top Bracket to wall and tighten top screw.
C. (Option 1 ) Secure Top Bracket to vertical
Bracket with self drilling screw(By others)
D. (Option 2 ) Secure top screw on top Bracket
E. (Option 3 ) Install #8 X 3/8" self drilling
1
",
screw in the side holes of top bracket.
4
F. Secure fixtures following instructions
from pages 1-3.
www.amerlux.com
INSTALLATION INSTRUCTIONS
SHEET #:
689-0512 (4 of 5)
OPTIONAL SELF-DRILL SCREWS (2)
4. * Install wall (By Others)
5. Spackle in fixture.
6. Remove SHIPPING BRACE.
7. Snap-in LENS.
*: Fixture MUST be mounted before wall/ceiling is installed.
SPEC. SHEET
REFERENCE:
TIGHTEN INTO PLACE