Acer AcerPower F5 사용자 설명서 - 페이지 14
{카테고리_이름} Acer AcerPower F5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AcerPower F5 29 페이지. Acer acerpower f1: user guide
Acer AcerPower F5에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), (영어) 사용자 가이드 (24 페이지), (프랑스어) Manuel D'utilisation (24 페이지), (사용자 가이드 (24 페이지)
페이지 인쇄
10
2
Press <Alt>+<F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six zeros.
4
In the Acer eRecovery window, select Recovery actions and click
Next.
5
In the Recovery settings window, select Reinstall applications/
drivers and click Next.
6
Select the desired driver/application and follow the instructions on
screen to re-install.
At first launch, Acer eRecovery prepares all the needed software and
may take few seconds to bring up the software content window.
Change password
Acer eRecovery and Acer disc-to-disc recovery are protected by a
password that can be changed by the user. Follow the steps below to
change the password in Acer eRecovery.
1
Boot to Windows XP.
2
Press <Alt>+<F10> to open the Acer eRecovery utility.
3
Enter the password to proceed. The default password is six zeros.
4
In the Acer eRecovery window, select Recovery settings and click
Next.
5
In the Recovery settings window, select Password: Change Acer
eRecovery password and click Next.
6
Follow the instructions on screen to complete the process.
Note: If the system crashes, and will not boot to Windows, you can
run Acer disc-to-disc recovery to restore the factory default image
under DOS mode.