Astrel Instruments AST8300X 시작하기 - 페이지 6
{카테고리_이름} Astrel Instruments AST8300X에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST8300X 19 페이지. Mounting filters
Astrel Instruments AST8300X에 대해서도 마찬가지입니다: 단계별 사용자 설명서 (4 페이지)
페이지 인쇄
Astrel Instruments
AST8300-X
Powering down the camera
WARNING: never power down the camera by simply disconnecting power supply: your camera
has a true PC inside running Linux and, as any other PC, you should shut it down in the correct
way. The Shutdown application in the main page of the Desktop will take care of all this
sequence, so, before powering down the camera you must run the Shutdown application. After
pressing shutdown, the camera will disconnect from wifi and emit a certain number of regularly
timed weak beep sounds. When the beeps end the camera can be powered off unplugging the
power cable. In case the beeps can't be heard, after shutdown wait for 1 minute before
unplugging the power cable.
The Linux distribution inside the camera is stored into the internal SD card, which is the main
storage of the camera. In unlikely situations, removing the power supply while the operating
system or any application is writing on the SD card could damage the files stored on it.
Getting Started
6/19
rev A