Astrel Instruments AST-8300-A 시작하기 - 페이지 14

{카테고리_이름} Astrel Instruments AST-8300-A에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST-8300-A 20 페이지.
Astrel Instruments AST-8300-A에 대해서도 마찬가지입니다: 자동 매뉴얼 (14 페이지), 사용자 설명서 (6 페이지)

페이지 인쇄

Astrel Instruments

After booting (usually after less than one minute) the camera emits a sound and is ready for

operation: the LCD monitor will display the Desktop in Stand Alone mode, while in Connected

mode the camera is waiting for VNC connection.

STEP 3: connect to the camera

Only for Connected mode:

• When using wifi, look for the camera access point name (the default one is ast8300ap)

and connect to it.

• Windows will complain because the access is limited but this is normal because you don't

have an internet connection, only a local LAN connection.

• Start the VNC viewer. When prompted, insert the camera IP address (10.0.0.1:1 for wifi

or 192.168.0.18:1 for cable) in the Remote Host field, like in the following screenshot:

After connection, the TightVNC viewer window will display the camera Desktop:

Getting Started

14/20

AST-8300-A

rev D