Astrel Instruments AST-8300-A 자동 매뉴얼 - 페이지 10

{카테고리_이름} Astrel Instruments AST-8300-A에 대한 자동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST-8300-A 14 페이지.
Astrel Instruments AST-8300-A에 대해서도 마찬가지입니다: 시작하기 (20 페이지), 사용자 설명서 (6 페이지)

페이지 인쇄

Astrel Instruments

AST-8300-A

Calibration with the dark frame

In order to calibrate the camera with a dark frame, define the amount of frames to

accumulate in the field 'Frame count'. Cover the guide objective to prevent light from

penetrating the camera and press the 'Start' button. At the end of the process the dark

frame will be formed, that will be substracted from every new frame, taken from the

camera, if the 'use calibration' parameter is chosen in the dialogue box of the guide setup.

GUIDING

You can start guiding after the celestial reference frame is determined.

Open 'Processing' -> 'Guiding' from the main menu and choose the 'Info/Configuration' tab.

Set the appropriate size of the square, following the star - 'Square size'. The square area

shouldn't be too small or too large, compared to the visible size of the star.

Choose the threshold algorithm, used to calculate the star position, 'Threshold alg.' The

value 'Smart' is the more precise dynamic threshold calculation, compared to 'Auto'. The

value 'Auto' is the dynamic threshold calculation. The value 'No thresh.' - threshold

calculation is disabled.

You can also save guiding logs in text files. To do this, you have to set the checkbox 'save

Autoguider Manual

10/14

rev A