Acer AcerPower M4 사용자 설명서 - 페이지 13
{카테고리_이름} Acer AcerPower M4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer AcerPower M4 24 페이지. Acer acerpower m4: users guide
페이지 인쇄Troubleshooting
The following questions are possible situations that may arise during
the use of your computer, and each is followed by simple answers and
solutions to the situation.
Q: I pressed the power switch but the system did not boot up.
A: Check the LED located above the power switch.
If the LED is not lit, no power is being applied to the system. Do any of
the following:
•
Check if the voltage selector switch located on the rear panel of
the computer is set to the correct voltage.
•
Check if you properly plugged the power cable into an
electrical outlet.
•
If you are using a power strip or AVR, make sure it is plugged in
and turned on.
If the LED is lit, check the following:
•
Is a non-bootable (non-system) floppy disc in the floppy drive? If
yes, remove or replace it with a system floppy disc and press Ctrl +
Alt + Del to restart your computer.
Q: Nothing appears on the screen.
A: Your computer's power management function automatically
blanks the screen to save power. Press any key to turn the display
back on.
If pressing a key does not work, restart your computer. If restarting
your computer does not work, contact your dealer or the technical
support centre for assistance.
Q: The printer does not work.
A: Do the following:
•
Make sure the printer is connected to a power outlet and that it is
turned on.
•
Make sure the printer cable is connected securely to the system's
parallel port and the corresponding port on the printer.
•
For additional information concerning the printer, refer to the
printer's documentation.
9