AmerTac ZHL110B 소유자 매뉴얼 - 페이지 2

{카테고리_이름} AmerTac ZHL110B에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AmerTac ZHL110B 20 페이지.

Introduction

Your Universal TV Remote controls most all TV brands

presently available.

Battery Saver:

If the remote accidentally gets stuck down the back of

the couch with a button pressed it will stop transmitting

after about 30 seconds so as not to drain the battery.

Code Saver:

When changing batteries have the new batteries handy

before removing the old ones. If the remote has no bat-

teries installed for more than about 10 minutes you will

lose the installed code.

1. Install 2 AAA alkaline batteries in the battery com-

partment on the back of the remote.

2. Look up the 4-digit code for your brand of TV from

the Code Table and install it into the remote.

Direct Library Code Entry

To enter Codes directly from Library Code Table:

1. Press and Hold the POWER and MUTE buttons at

the same time until the red indicator remains on.

2. Release the buttons.

3. Enter the 4 digit code from the code table.

Note: after a valid code entry, the red indicator turns

off. For an invalid code, the red indicator fl ashes.

4. With your device on, press CHANNEL UP. If the

device responds, no further programming is required.

Note: If some buttons do not operate your equipment,

try one of the other codes for your brand.

5. Write your code below in case you forget it: