Cognex 3D-A5005 하드웨어 참조 매뉴얼 - 페이지 7
{카테고리_이름} Cognex 3D-A5005에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cognex 3D-A5005 19 페이지.
페이지 인쇄
Specification
Resolution
Clearance Distance (mm)
The minimum distance required before the
sensor will detect 3D features.
Near Field of View (mm x mm)
The size of the area closest to the sensor where
3D features can be detected. Features above
the Near Field of View will not be captured by
the sensor.
Measurement Range (mm)
The total distance in which the sensor can
detect 3D features.
Far Field of View (mm x mm)
The size of the area farthest from the sensor
where 3D features can be detected. Features
below the Far Field of View will not be captured
by the sensor.
Refer to the following diagram for physical dimensions of the 3D-A5000 sensor:
3D-A5005
X, Y = 42 - 44 µm
X, Y = 195 - 199 µm
300
60 x 44
12
65 x 46
7
Cognex 3D-A5000 Sensors
3D-A5030
3D-A5060
X, Y = 361 - 454
1465
1400
280 x 210
520 x 390
80
285 x 215
645 x 490
µm
400