Cognex DataMan 100 빠른 참조 매뉴얼 - 페이지 12

{카테고리_이름} Cognex DataMan 100에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cognex DataMan 100 18 페이지. Shd/c-mount kit removal instructions
Cognex DataMan 100에 대해서도 마찬가지입니다: 제거 지침 (2 페이지), 빠른 참조 (16 페이지)

페이지 인쇄

DataMan 100 Training

For best performance, you can train DataMan. Train DataMan by placing a code

in front of the reader and doing one of the following:

In the Display pane of the Setup Tool you

can click the Train Code button to train the

code, and you can click the Optimize Lighting

button to optimize lighting.

Press and hold the trigger

button for at least 3 seconds.

This trains the code and

optimizes lighting.

Click and hold the trigger

button in the Setup for at least

3 seconds. This trains the code

and optimizes lighting.

Training and Trigger Modes

Training is supported for the trigger modes shown below:

Trigger Mode

Training Supported?

Single

Presentation

Manual

DataMan 100 Training Feedback

DataMan reports the status of the tuning operation using its signalling

LEDs:

Flashes red

between 1 and

3 times when

training attempt

is complete.

Greater numbers

of flashes

indicate better

training results.

Yes

Displays steady

green if trained,

steady yellow if

untrained.