Air Force Pro 60 운영 및 유지보수 매뉴얼 - 페이지 10

{카테고리_이름} Air Force Pro 60에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Force Pro 60 17 페이지. Air force pro 15; 40; 60; 80 linear air pump, oil-less compressor

페이지 인쇄

Maintenance Manual

1. To clean the air filter

A. Remove the screw on top. (As shown in Figure1)

B. Remove filter cover.

C. Take the filter out and clean it with clean water and dry it.

D. Put it back and secure the fixing plate with the screw in.

IMPORTANT: To open upper enclosure, please make sure

you have unplugged the power cord before opening.

2. To change the diaphragms

A. Remove the four screws around the aluminum upper housing,

and take the housing off. (As shown in figure 2)

B. Remove the four screws from the diaphragm housing. (As shown in figure 3)

C. Remove the u-nut in the center of diaphragm.

D. Take the diaphragm off its place.

E. Replace a new one by mounting the rubber studs

into their position.

F. Press the rim of the diaphragm into the ring.

G. Secure the magnet with a new u-nut and screw and put

the diaphragm housing back with the four screws on.

*Replacement part information.

Model Type

Air Force Pro™ 40

Part No: 746505

Air Force Pro™ 60

Part No: 746510

Air Force Pro™ 80

Part No: 746515

Maintenance Manual

Air Force Pro™ 40, 60, 80

Part No: 746505, 746510, 746515

Recommended once every six months

Figure 3

Diaphragm

service kit

Part No:

746520

Part No:

746525

Part No:

746525

Air filter

service kit

Part No:

746535

Part No:

746535

Part No:

746535

Figure 1

Figure 2