Akw AKW91126R 설치 및 사용자 설명서 - 페이지 2

{카테고리_이름} Akw AKW91126R에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw AKW91126R 12 페이지. Shower screens

Screen Options

These screens can be fitted to normal trays and trays with integral or optional pipework ducts.

The extra wide wall compensators are required for trays with pipework ducts.

Read the instructions to see how everything fits together. Determine the position of each

element and its screw hole positions by way of a dry fit, but do not drill any holes until the

positions are finalised.

1. Locating the Compensator

Remove the adjustment mechanism from the side of

the compensator. Remove the plastic infill if present.

Place the compensator on the tray and push it

up against the wall. Line the outside edge of the

compensator up with the edge of the tray. The slots

in the compensator for the adjustment mechanism

should be on the inside of the showering area.

Fig. 1.0

Compensator

Outside

tray edge

General: 01905 823 298

Inside

tray edge