Canon VIXIA HFR60 매뉴얼 - 페이지 11
{카테고리_이름} Canon VIXIA HFR60에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon VIXIA HFR60 29 페이지. Using an ios/android device to control the camcorder from another location after setting it up in your home (remote control+streaming)
Canon VIXIA HFR60에 대해서도 마찬가지입니다: 시작하기 (2 페이지)
페이지 인쇄For more information on your access point, please refer to its Instruction Manual.
Simply press and hold the WPS button on your wireless router and then touch the
WPS:
camcorders screen. This is the easiest connection method if you are using a WPS-
Button*
compatible router.
Access the access points configuration screen using your Web browser. The camcorder
WPS: PIN
will give you a PIN code, which you will enter into the browser. You will need a WPS-
Code*
compatible router and a computer or other device connected to it.
Search for
Following the camcorders onscreen instructions, you select the desired access point from
Access Points
a list and then enter your password.
Manual
You manually enter the access points name, password and other network settings. This
Setup
method is recommended only for advanced users of Wi-Fi networks.
* WPS, which stands for Wi-Fi Protected Setup, is a standard that makes connecting to a wireless router
easier.
If your access point is WPS-compatible , connecting the camcorder to it can be very easy. If you cannot
successfully connect the camcorder using WPS, try using the [Search for Access Points] method.
[WPS: Button] method: Please proceed to step 14-a-1.
[WPS: PIN Code] method: Please proceed to step 14-b-1.
Search for Access Points: Please proceed to step 14-c-1.
Manual Setup: Please proceed to step 14-d-1.
REFERENCE
The camcorder can connect to a Wi-Fi network using a wireless router (access point) and even
remember the settings for the 4 most recently used access points.
IMPORTANT
General requirements for Wi-Fi connections.
Correctly configured router that complies with the 802.11b/g/n protocol and is Wi-Fi certified
•
(bears the logo shown below) and a home network.