Akw T301 설치, 서비스 및 사용자 지침 - 페이지 10

{카테고리_이름} Akw T301에 대한 설치, 서비스 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Akw T301 16 페이지. Basin mixer valve

Commissioning

Step 1

To Adjust Temperature Setting

1. Remove cover cap

2. Use a screwdriver to loosen the

centre screw in the lever.

3. Move the lever to full hot, note its

position and remove the lever.

4. Let the water run until the

temperature stabilises.

Step 2

1. Insert the 2mm A/F

hexagonal wrench key

(supplied) into the grub

screw in the centre of the

head assembly (refer to

illustration).

2. Rotate the grub screw as

necessary until the required

maximum blend temperature

is achieved. Rotate the grub

screw anticlockwise to increase

the temperature or clockwise to decrease

the temperature (refer to illustration).

3. Refit the lever in its original position. If required the lever can be fitted in any

position that allows unobstructed movement of the lever over its operating range.

4. Move the lever to the off position.

5. Use the screwdriver to tighten the screw in the lever.