Canon ZR930 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Canon ZR930에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon ZR930 2 페이지. Minidv cam
Canon ZR930에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 (24 페이지)

Recharging the Battery; Running on AC Power

p. 5)

Note: The ZR930 has a rechargeable lithium ion battery. A full charge lasts

approximately 50 minutes.

1. The DC IN power/charging socket for the ZR930 is on the lower

back right of the camera body, next to the battery;

2a. To charge the battery, plug the power cord in to DC IN and an AC

outlet. (The camcorder should be turned OFF.)

2b. To run the camcorder on AC power, plug the power cord in to DC

IN and an AC outlet. You may use the CAMERA and/or PLAY

settings. (The battery may stay on the camcorder, but won't charge.);

3. When charging the battery, the CHARGE light will stop flashing at

full battery charge.

1, 2

MiniDV to PC Video Transfer—User Transfer Only

p. 6)

Note: MiniDV video to PC transfers are beyond the scope of equipment and

services offered by AV Services. Video transfer requires user-supplied

hardware and software.

● Hardware you will need:

1. DV Cable, 4-pin or 6-pin, depending on your computer;

2. A computer equipped with a DV (IEEE 1394) terminal or a DV

capture board.

● Software you will need:

1. Video editing software for your Windows or Macintosh computer;

2. The appropriate software driver installed on your computer.

● Plus, operating instructions for your specific system setup.