Canon 220P - imageFORMULA ScanFront 사용자 설명서 - 페이지 7

{카테고리_이름} Canon 220P - imageFORMULA ScanFront에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 220P - imageFORMULA ScanFront 28 페이지. Scan-to-share
Canon 220P - imageFORMULA ScanFront에 대해서도 마찬가지입니다: 소프트웨어 업데이트 (11 페이지), 브로셔 및 사양 (4 페이지), 브로셔 및 사양 (33 페이지), 브로셔 및 사양 (6 페이지)

페이지 인쇄

Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below.

❏ Installation Location

The performance of this scanner is affected by the

environment in which it is installed. Make sure that the

location where the scanner is installed meets the following

environmental requirements.

● Provide adequate space around the scanner for

operation, maintenance, and ventilation.

At least

400 mm

● Avoid installing the machine in direct sunlight. If

this is unavoidable, use curtains to shade the

scanner.

● Avoid locations where a considerable amount of

dust accumulates.

● Avoid warm or humid locations, such as in the

vicinity of a water faucet, water heater, or

humidifier, and avoid locations where the fumes

from ammonia, paint thinner, or other volatile

chemicals may be present.

● Avoid locations that are subject to vibration.

❏ Power

At least

600 mm

● Avoid exposing the scanner to rapid changes in

temperature. If the room in which the scanner is

installed is cold but rapidly heated, water droplets

(condensation) may form inside the scanner. This

may result in a noticeable degradation in scanning

quality.

The following conditions are recommended for

optimal scanning quality:

Room temperature: 10 °C to 32.5 °C (50 °F to

90.5 °F)

Humidity: 20% to 80% RH

● Avoid installing the scanner near equipment that

generates a magnetic field (e.g. speakers,

televisions, or radios).

● Connect only to a power outlet of the rated voltage

and power supply frequency (220-240 V, 50/60

Hz).

● Do not connect other electrical equipment to the

same power outlet to which the scanner is

connected. Also, when using an extension cord,

make sure that the extension cord is rated for the

current requirements of the scanner.

● Never try to disassemble the AC adapter or modify

it in any way, as this is extremely dangerous.

● The power cord and AC adapter may become

damaged if they are often stepped on or if heavy

objects are placed on them. Continued use of a

damaged power cord and AC adapter can lead to

an accident, such as a fire or electrical shock.

● Do not use the power cord while it is coiled.