Canon 700F - CanoScan LiDE 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Canon 700F - CanoScan LiDE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 700F - CanoScan LiDE 19 페이지. Brochure
Canon 700F - CanoScan LiDE에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 브로셔 (10 페이지), 브로셔 (8 페이지)

페이지 인쇄

Scanning Film

This scanner can scan 35 mm film strip one frame at a time. Follow the procedure below when scanning

film.

• Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of

other units may lead to malfunctions of the connected unit and the scanner.

• Do not touch the metallic parts of the FAU connector.

• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can

affect image quality or damage the film.

Attach the cable for the Film Adapter Unit to the

FAU connector on the scanner's side panel.

Insert the cable plug of the Film Adapter Unit

all the way into the FAU connector.

Open the document cover and place the Film

Guide on the document glass of the scanner.

Align the Film Guide's tab with the FAU symbol on the

document glass of the scanner.

Remove the cap from the Film Adapter Unit and

gently set the Film Adapter Unit over the first

frame in the Film Guide.

Align the tab on the Film Adapter Unit with the Film

Guide.

You need to calibrate the scanner before scanning film for

the first time. Do not place a film strip in the Film Guide at

this point as it is not required for calibration.

Scanning Film