ASTRO A40 MixAmp 사용 설명서 - 페이지 4

{카테고리_이름} ASTRO A40 MixAmp에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASTRO A40 MixAmp 13 페이지. +mixamp pro
ASTRO A40 MixAmp에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지), 사용 설명서 (14 페이지), 사용 설명서 (14 페이지), 사용 설명서 (9 페이지), 사용 설명서 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용 설명서 (8 페이지)

Controls

A40 MixAmp™

While the ASTRO Gaming A40 MixAmp™ contains a complex electronic

package, controlling it is quite simple.

The MASTER VOLUME knob raises and lowers volume of all incoming audio

feeds together. It will not raise or lower the volume of your outgoing voice

communication. (The distance between your microphone and your mouth is

the best way to adjust this).

The BALANCE control enables you to dial in the perfect mix of game-to-

voice communication.

Important: It is possible to bring either the GAME or the VOICE volume

down to 0% volume, at either end of the BALANCE control dial spectrum.

Most people find that the ideal mix is somewhere between 11 and one

o'clock.

The DOLBY® on/off button turns on Dolby® Digital (when connected with

a digital cable), or Dolby® Pro Logic II (when connected with an analog

cable). Dolby® is active when the surrounding RED light is illuminated.

When the DOLBY® button is not illuminated, the A40 MixAmp™ is operat-

ing in 2-Channel stereo mode, and no Dolby® processing is applied to the

incoming audio signal.

The MASTER POWER button does exactly what you might expect, and is a

convenient way to mute the audio to your headset or headphones.

Important: When the headset is disconnected, the A40 will automatically

shut down. This feature is to prevent accidental power loss when you are

traveling with your A40. If you reconnect your headset within a short period

of time, your A40 will automatically return to the state you had it in before

it was disconnected. If you reconnect after this short time, you'll need to

restart the A40 manually.

When your A40's batteries are low, the RED ring around the MASTER

POWER button will flash ON and OFF intermittently. A SOLID RED button

indicates adequate power.

If you are using the optional A40 rechargeable battery pack, an AMBER ring

around the MASTER POWER button with flash ON and OFF when the bat-

tery is recharging (plugged into USB power). When the charge is complete,

a SOLID AMBER ring will illuminate.

You can check the power state of the A40 at any time, whether or not a

headset is connected. The MASTER POWER button will illuminate for a short

time, indicating how much charge the battery contains (FLASHING - low, or

SOLID - OK), and then the A40 will shut back down automatically.

Controls

controls