Canon 9080C - DR - Document Scanner 빠른 참조 - 페이지 2
{카테고리_이름} Canon 9080C - DR - Document Scanner에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon 9080C - DR - Document Scanner 17 페이지. Canon all in one printer user manual
페이지 인쇄
PRECAUTIONS
The Canon DR-6080 and DR-9080C are compact desktop document scanners that
offer rapid scanning, a large document feeding capacity, and reliable paper
feeding. To ensure optimum performance with either unit, please follow the
recommendations below.
● Make sure that your documents are within the acceptable scanning sizes.
Width: 2.2 – 12 inches (55 – 305 mm)
Length: 2.8 – 17 inches (70 – 432 mm)
Thickness: 0.06 – 0.15 mm (auto feed), 0.05 – 0.3 mm (manual feed)
Weight: 16 – 32 lb. bond (60 – 120 g/m
● If there is any wet ink or paste on the document, wait until the ink or paste has thoroughly
dried before scanning the document.
● Always clean the scanning rollers after scanning a document that has pencil writing on it.
● Scanning a double-sided document printed on thin paper may result in an image in which
elements from the opposite page show through. To avoid this, adjust brightness in the
application software.
● If you scan documents with a rough surface, friction between the documents may cause a
feeding error. If this happens, select manual feeding and scan the documents one by one.
● When you scan a batch of NCR documents, make sure they are not stuck together.
Refer to Chapter 4.1 of the DR-6080/9080C Instructions manual for further details on acceptable document types and how
to place documents on the scanner.
■ DOCUMENT TYPES TO AVOID
To avoid paper jams, damage to documents, and scanner malfunction, do not feed the following types of documents.
Instead, make a copy of the document and scan the copy.
Wrinkled or
creased paper
Curled paper
Torn paper
1
Documents up to 39.4 inches (1000 mm) can be scanned in the extra long mode.
2
)
Paper with clips
or staples
Carbon-backed paper
Coated paper or fax
recording paper
Onion skin or
other thin paper
Paper with binding
holes