Canon CanoScan 9950F 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Canon CanoScan 9950F에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CanoScan 9950F 30 페이지. Canon canoscan 9950f: quick start
Canon CanoScan 9950F에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지)

페이지 인쇄

5) Film Scan

Select "Film Scan" from the "Function" menu. The window shown below will appear.

Only an upper right frame of the 35mm sleeve film guide can be scanned.

Scan count

Set a number to be scanned ranging from 1 to 100.

Image handling

When "Read in memory (no file)" is selected, the image is read into the memory

and be destroyed. When "Save to TIFF file" is selected, an image file scanned by

FAU lamp and an image file scanned by IR LED are saved. The images scanned

by FAU lamp is stored in "Color24_0.tif" file, and the image scanned by IR LED is

stored in "IR_0.tif" file. Both files are included in the folder of the Canon Scanner

Test.

IR.tif is an infrared image scanned with FARE function working. If FARE function

works normally, only dirt or dust on the film will be scanned as an image. If FARE

function does not work well, IR.tif image will be all in black.

When scan count is set at 2 or larger number, the scanned images are saved in

more than one file including Color24_0.tif/IR_0.tif, Color24_1. and tif/IR_1.tif.

Note: When scanning a film, the color of the scanned image may appear lighter than

that of the original film. This is because the image is not subject to the image

processing yet.

1 - 10