Acer Altos BrainSphere P130 F7 사용자 설명서 - 페이지 24

{카테고리_이름} Acer Altos BrainSphere P130 F7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer Altos BrainSphere P130 F7 40 페이지.

Turning on the system

After making sure that you have properly set up the system, applied power and connected

all the necessary peripherals, you can now power on the system. Follow the procedure

below.

Press the power button

The system starts up and displays a welcome message on the monitor. After that, a series

of power-on self-test (POST) messages appears. The POST messages indicate if the

system is running well or not.

Note: If the system does not turn on or boot after

pressing the power button, go to the next section

for the possible causes of the boot failure

Aside from the POST messages, you can determine if the system is in good condition by

checking if the following occurred.



The power status indicator on the front panel lights up blue.



The Num Lock, Caps Lock and Scroll Lock indicators on the keyboard light up.

If the system fails to boot after you have applied power, check the following factors that

might have caused the boot failure.



The external power cord may be loosely connected.



Check the power cord connection from the power outlet to the power cord socket on

the rear panel. Make sure that the cord is properly connected to the power outlet and to

the power cord socket.

No power comes from the grounded power outlet. Have an electrician check your

power outlet.



Loose or improperly connected internal power cables.

Check the internal cable connections. If you are not confident to perform this step, ask

a qualified technician to assist you.

Warning! Make sure all power cords are

disconnected from the electrical outlet before

performing this task.

。