Ametek NSG 4070C1-110 빠른 시작 매뉴얼 및 안전 지침 - 페이지 12
{카테고리_이름} Ametek NSG 4070C1-110에 대한 빠른 시작 매뉴얼 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Ametek NSG 4070C1-110 20 페이지.
페이지 인쇄
AMETEK CTS
Power supply connector for wide range supply: 110 / 230 Volts, 50 / 60 Hz autoranging.
1)
2)
Fuse F1, see technical specifications for selection guide of fuse F1
3)
User port D-Sub 15 pole
4)
RS232 - interface for remote control of the NSG 4070 using a null modem connection
5)
Input for optical EUT Monitoring, Fiber optic cable plug, HP versatile link HFBR0501 series 40 kBd
6)
Optical RS232 - interface for remote control of the NSG 4070 using USO 4013
7)
Network connector 10 / 100 Ethernet
USB device connector
9)
USB host connector
10) Fans for cooling the internal parts of the unit
11) BNC sockets
Monitoring input analog, BNC socket, 0-24 V Ri=15 kΩ, 6 mV resolution
a)
Monitoring digital input, BNC socket, 0-24 V via optical coupler Ri=1.5 kΩ, switching threshold approx. 2 to 3 V
b)
External modulation input, BNC socket, Impedance >10 kΩ, Level: 1 Vpp / 100% AM: 1 Hz – 50 kHz
c)
10 MHz reference output, BNC socket, approx. 1 Vpp / 50 Ω. Please note: The connected signal will be mixed with
d)
the selected internal modulation. Disconnect this port for using the internal modulation only.
e)
Trigger input, BNC socket, TTL for external triggering
Quick Start and Safety Guide
Figure 3. - Back panel
NSG 4070
12 / 20