Canon CanoScan LiDE 80 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Canon CanoScan LiDE 80에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon CanoScan LiDE 80 20 페이지. Color image scanner
Canon CanoScan LiDE 80에 대해서도 마찬가지입니다: 사양 (1 페이지)

페이지 인쇄

Open the document cover and

remove the Film Adapter Unit.

To continue scanning your film, follow the

Scanning Film steps.

Scanning Film

The following steps explain how to scan films with ArcSoft PhotoStudio and ScanGear CS.

Place the film in the Film Guide.

Place the film face up in the Film Guide (images

and words should read correctly from above) with

the spaces between frames aligned with the white

lines on the guide.

• Clean the document glass before placing the Film Guide on it, otherwise dirt and dust

can affect image quality or damage the film.

• Use a blower brush to remove any dust from the film, which will affect the image

quality, and take care to hold the film by its edges to avoid transferring dirt or

fingerprints to it.

Remove the CAP from the Film Adapter Unit

and gently set the unit over the frame you

wish to scan.

• Do not move the Film Adapter

Unit once it has been placed on

the Film Guide. Sliding it may

scratch the film.

Gently close the document cover.

• The document cover does not touch the document glass completely. Be careful not to

force the document cover down.

• Do not press down on, or rest your hands on, the document cover.

Start ArcSoft PhotoStudio.

Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio] and [PhotoStudio 5].

Double-click the [Applications (Mac OS 9)] and [PhotoStudio] folders and the

[PhotoStudio] icon.

White Line

Position the Film Adapter Unit so that its align-

ment tab is aligned with the Film Guide.

Scanning Film

Put the CAP back

on the Film

Adapter Unit.