Doran 4100XL 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Doran 4100XL에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Doran 4100XL 6 페이지.

Controls and Display Operation:

The operational controls for the Model 4100XL consist of the ZERO with optional

PRINT and or UNITS buttons. A six digit LED display is used to provide weight

indications and operator messages describing scale operation. Scale status such

as motion (MOT), polarity (NEG), and center of zero (ZERO) are displayed on

annunciators located to the left of the display area. Scale units are indicated on

four annunciators located to the right of the main weight display.

ZERO:

The ZERO button is used to zero the scale prior to making a reading. The ZERO

button can function over the full range of the scale or it can be limited to a zero

band equal to +1.9% of scale capacity for Canadian applications. To zero the

scale, wait until the scale is stable and press the ZERO button. The scale will

zero immediately. The scale will not "zero" if the scale is in motion.

UNITS (optional):

The UNITS button permits the operator to change the 4100XL display weight

units easily. Simply press the UNITS button and the scale will indicate the

correct weight in the new units, lb, kg, g, oz, lb-oz.

PRINT (optional):

The PRINT button permits the operator to print the current weight or send a data

stream to an external device. Like the ZERO button, the user must wait for

motion to stop before pressing the PRINT button. The current weight will then be

transmitted to the printer or external device.